Instrument Tour
R&S
®
SMA100B
40Getting Started 1419.8620.02 ─ 08
AC power supply connector and switch
Mains power switch for performing the following tasks:
●
Connecting the internal power supply to the power source
●
Disconnecting the internal power supply from the power source
How to: Chapter 4.6, "Connecting to Power", on page 19.
RF
Rear panel connector for the RF signal. This connector is for use of the instru-
ment in a 19" rack.
How to:
●
Chapter 4.4.2, "Mounting the R&S SMA100B in a Rack", on page 17
●
Chapter 4.9, "Connecting to RF", on page 21
Rear Panel Tour
To Next Page
Loading...
