Rohde & Schwarz RTM3000 Series - Page 100

Trigger
R&S
®
RTM3000
100User Manual 1335.9090.02 ─ 09
Remote command:
TRIGger:EVENt:WFMSave on page 477
TRIGger:EVENt:WFMSave:DESTination, 1, en_US
References
Saves reference waveforms of all active channels, and activates the references. This
action works only with single acquisition.
The channels are assigned to the references: C1 to R1, C2 to R2 and so on. If a chan-
nel is off, the assigned reference is also not active.
If the history option is installed, and "Nx Single" > 1, the waveforms of the last acquisi-
tion are saved as reference waveforms.
Remote command:
TRIGger:EVENt:REFSave on page 476
Actions on trigger