Rohde & Schwarz RTM3000 Series - Page 626

Remote control commands
R&S
®
RTM3000
626User Manual 1335.9090.02 ─ 09
Suffix:
<b>
.
1..4
<n> *
Selects the frame.
Return values:
<AddressValue> Decimal value
Range: 0 to 2047
Increment: 1
Usage: Query only
BUS<b>:I2C:FRAMe<n>:ADEVice?
Returns the decimal address value of the indicated frame without R/W bit.
Suffix:
<b>
.
1..4
<n> *
Selects the frame.
Return values:
<SlaveAddress> Decimal value
Range: 0 to 1023
Increment: 1
Usage: Query only
BUS<b>:I2C:FRAMe<n>:AMODe?
Returns the address length.
Suffix:
<b>
.
1..4
<n> *
Selects the frame.
Return values:
<AddressMode> BIT7 | BIT10
Usage: Query only
BUS<b>:I2C:FRAMe<n>:ASTart?
Returns the start time of the address for the indicated frame.
Suffix:
<b>
.
1..4
<n> *
Selects the frame.
Serial bus analysis