Rohde & Schwarz RTM3000 Series - Page 678

Remote control commands
R&S
®
RTM3000
678User Manual 1335.9090.02 ─ 09
BUS<b>:I2S:FRAMe<n>:STARt?
Returns the start time of the specified frame.
Suffix:
<b>
.
1..4
<n> *
Return values:
<StartTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Usage: Query only
BUS<b>:I2S:FRAMe<n>:STATe?
Returns the state of the specified frame on the right audio channel.
Suffix:
<b>
.
1..4
<n> *
Return values:
<FrameState> ERRor | OK | INSufficient
ERRor: an error occured in the frame.
OK: frame is valid.
INSufficient: frame is not completely contained in the acqui-
sition. The acquired part of the frame is valid.
Usage: Query only
BUS<b>:I2S:FRAMe<n>:STOP?
Returns the end time of the specified frame.
Suffix:
<b>
.
1..4
<n> *
Return values:
<StopTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Usage: Query only
BUS<b>:I2S:FRAMe<n>:TDM<o>:STATe?
Returns the state of the specified TDM channel and frame.
Serial bus analysis