Rohde & Schwarz Scope Rider RTH - Setting the Date, Time and Language

General Instrument Setup
R&S
®
Scope Rider RTH
283User Manual 1326.1578.02 ─ 12
Figure 13-2: Self-alignment in meter mode
13.4 Setting the Date, Time and Language
The instrument has a date and time clock. You can adjust the clock to the local time,
and you can select the display language. Supported languages are listed in the data
sheet. The help is provided in English.
A reboot of the instrument is not necessary.
Set date and time
Setting the Date, Time and Language