Rohde & Schwarz Scope Rider RTH - Channel<M>:History:replay; Channel<M>:History:tsabsolute; Channel<M>:History:tsdate; Channel<M>:History:tsrelative

Remote Control Commands
R&S
®
Scope Rider RTH
347User Manual 1326.1578.02 ─ 12
Example:
CHANnel:HISTory:PLAY; *OPC
See also Chapter B, "Command Sequence and Synchroniza-
tion", on page 514.
Usage: Event
Asynchronous command
CHANnel<m>:HISTory:REPLay <AutoRepeat>
If set to ON, the playback of the selected history segments repeats automatically.
Suffix:
<m>
.
Suffix is irrelevant, omit it.
Parameters:
<AutoRepeat> ON | OFF
*RST: OFF
CHANnel<m>:HISTory:TSABsolute?
Returns the abolsute daytime of the current segment (CHANnel<m>:HISTory:
CURRent).
Suffix:
<m>
.
Suffix is irrelevant, omit it.
Return values:
<TimeStampAbsTime>String containing the time and unit.
Usage: Query only
CHANnel<m>:HISTory:TSDate?
Returns the date of the current segment (CHANnel<m>:HISTory:CURRent).
Suffix:
<m>
.
Suffix is irrelevant, omit it.
Return values:
<TimeStampAbsData>String with date of the current acquisition (absolute time)
Usage: Query only
CHANnel<m>:HISTory:TSRelative?
Returns the relative time of the current segment - the time difference to the newest
segment (index = 0).
See also CHANnel<m>:HISTory:CURRent.
Suffix:
<m>
.
Suffix is irrelevant, omit it.
Waveform Analysis