Rohde & Schwarz Scope Rider RTH - Page 434

Remote Control Commands
R&S
®
Scope Rider RTH
434User Manual 1326.1578.02 ─ 12
Return values:
<AckBitStartTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:BYTE<n>:COMPlete?
Returns if the indicated byte is completely contained in the acquisition.
Suffix:
<m>
.
*
<n> *
Return values:
<IsComplete> 1 | 0
*RST: OFF
Usage: Query only
BUS:I2C:FRAMe<m>:BYTE<n>:STARt?
Returns the start time of the specified data byte.
Suffix:
<m>
.
*
<n> *
Return values:
<StartTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:BYTE<n>:VALue?
Returns the data value of the specified byte.
Suffix:
<m>
.
*
<n> *
Return values:
<Value> Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
Protocol Analysis