Instrument Tour
R&S
®
SMB100B
26Getting Started 1422.1045.02 ─ 01
Risk of touchscreen damage
Inappropriate tools or excessive force can damage the touchscreen.
Observe the following instructions when operating the touchscreen:
●
Never touch the screen with ball point pens or other sharp objects, use
your fingers instead.
As an alternative, you can use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
●
Never rub the screen surface strongly, for example with a dust cloth.
For instructions on cleaning the screen, see the Maintenance chapter in
the R&S SMB100B user manual.
4.1.2 Utility Keys
The utility keys set the R&S SMB100B to a defined state, and provide access to
basic settings and information on assistance.
Table 4-1: Utility keys
Utility Key Assigned functions
[Preset] Sets the instrument to a defined state
[Local] Switches from remote control to local (manual) control
[Setup] Accesses the general instrument settings
[Help] Displays context-sensitive help text
4.1.3 On/Standby
The [On/Standby] key starts up and shuts down the instrument, and switches
between the standby and the ready state.
●
In the ready state, On/Standby key lights green. The instrument is ready for
operation.
●
In the standby state, the On/Standby key lights orange. The standby power
mode keeps the power switch circuits and the oven-controlled crystal oscilla-
Front Panel Tour
To Next Page
Loading...
