Preface
R&S
®
SMB100B
7Getting Started 1422.1045.02 ─ 01
1 Preface
The R&S SMB100B is a new high-performance signal generator developed to
meet demanding customer requirements. Offering excellent signal characteristic
and straightforward and intuitive operation, the signal generator makes signal
generation fast and easy.
1.1 Key Features
Outstanding key features of the R&S SMB100B are:
●
SCPI macro recorder and code generator for generating executable remote
control code from manual operating steps (for MATLAB
®
, CVI, etc.)
●
Frequency range from 8 kHz to 1 GHz, 3 GHz or up to 6 GHz
●
Excellent SSB phase noise of -134 dBc (meas.) at 1 GHz, 20 kHz offset
●
Low wideband noise. For frequencies between 15 MHz and 6 GHz and 30
MHz offset, < 153 dBc (typ.)
●
Ultra high output power of 34 dBm (meas.) for 1 GHz
●
Compact rack with a height of 2 U and a ¾ 19" width
●
Pulse train generation
●
5" Graphical User Interface with touchscreen
For more information, see data sheet.
1.2 For Your Safety
The R&S SMB100B is designated for the development, production and verifica-
tion of electronic components and devices in industrial and laboratory environ-
ments. Use the R&S SMB100B only for its designated purpose. Observe the
operating conditions and performance limits stated in the data sheet.
The product documentation helps you to use the R&S SMB100B safely and effi-
ciently. Keep the product documentation in a safe place and pass it on to the sub-
sequent users.
For Your Safety
To Next Page
Loading...
