Rohde & Schwarz XT 4410A - Page 166

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Special Conditions
– 3.52 – 6076.0822.12.01
 0HQX987;3$5$0(7(56
In this menu the transmitter parameters are displayed and edited. For Default Settings and
Connection of Peripheral Equipment see Appendix A1.
Starting point: Menu 510 (RADIO MODULES)
+ Press softkey (7) and select module VU POWER AMPLIFIER by using the
tuning knob.
+ Press softkey (3) and the following display appears:
No. Control Action Notes
2 Press softkey
POW LEV.
Select setting.
Selection of edit fields for power levels
/2:
editing the value for low power level
0(',80 editing the value for medium power
level
+,*+ editing the value for high power
level
3 Press softkey
AM.
Set value.
Setting the AM transmit power (for LOW,
MEDIUM, HIGH)
For AM the power level (carrier unmodu-
lated) can be set to values from 1 to 30 W.
4 Press softkey
FM.
Set value.
Setting the FM transmit power (for LOW,
MEDIUM, HIGH)
For FM the power level can be set to val-
ues from 1 to 100 W.
5 Press softkey
AM MOD.
Set value.
Setting the AM modulation depth in the
range from 10 to 99%, 90% is recom-
mended.







