065 75$16&(,9(5 ; $ ; $
Operator’s Manual • Use under Special Conditions
6076.0822.12.01 – 3.53 –
11 Press softkey
CONNECT.
Select setting.
Defines whether an external power am-
plifier is connected at X. 4410A or
X. 4460A and selects its type:
98/
for future use
98/ for future use
9'/ UHF Amplifier
100 W AM
98/9'/ for future use
98/9'/ for future use
98/6(59'/ for future use
98/6(59'/ for future use
)' UHF Agile Filter
See Appendix A1, Connection of Periph-
eral Equipment.
12 Press softkey
PA UHF.
Activates / deactivates operation with the
connected UHF amplifier.
The power amplifier can be activated via
software at one of the power levels LOW,
MED, and HIGH.
13 Press softkey
PA VHF.
Activates / deactivates operation with the
connected VHF amplifier.
The power amplifier can be activated via
software at one of the power levels LOW,
MED, and HIGH.
14 Press softkey PA.
Select setting.
Selection of the configuration of the
power level for the external power ampli-
fier
'HIDXOW
selects power level (LOW, MED,
HIGH) for use of X. 4410A or
X. 4460A without power amplfier
98/ for future use
98/ for future use
9'/ UHF Amplifier 100 W AM
)' UHF Agile Filter
See Appendix A1, Connection of Periph-
eral Equipment.
No. Control Action Notes
To Next Page
Loading...
