065 75$16&(,9(5 ; $ ; $
Operator’s Manual • Use under Normal Conditions
– 2.20 – 6076.0822.12.02
q LED 64/ * (Front Panel)
indicates reception of a signal by Guard Receiver ET 4400G.
q LEDs to (Front Panel)
indicate which signal is being output via the loudspeaker (3 + 4 presently not used):
q LED /2&$/ (Front Panel)
is illuminated when the LOCAL key has been pressed, indicating that the transceiver can
be controlled only locally via the integrated control unit. In addition, a headset (PTT key,
microphone), which may be connected, will be enabled as well.
q LED %$77 (Front Panel)
signals availability of battery power.
q LED $&'& (Front Panel)
signals availability of AC/DC power.
LED AF signal
1234
no AF signal
OLJKWHG
AF signal of main receiver and in addition of guard
receiver, if switched on via softkey GUARD in Menu
110 (MANUAL FIX.FRQ) or 210 (USER PRESET
FIX.FRQ).
IODVKLQJ
AF signal of guard receiver (VHF band)
IODVKLQJ
AF Signal of guard receiver (UHF band)
IODVKLQJ IODVKLQJ
AF signals of guard receiver (VHF and UHF bands)
To Next Page
Loading...
