Command Reference
R&S
®
ZNB/ZNBT
1054User Manual 1173.9163.02 ─ 54
Example:
MMEM:NAME 'C:\Screenshots\PLOT1.BMP'
Define a printer file name (without creating the file), assuming
that .BMP is the current file format (see HCOPy:DEVice:
LANGuage).
HCOP:DEST 'MMEM'; :HCOP
Select 'Print to file' and create the printer file specified before.
Manual operation: See "To File..." on page 627
HCOPy:DEVice:LANGuage <Format>
Selects a file format for printer files. Selecting the format is recommended to ensure
that the file defined via MMEMory:NAME can be read or imported by an external appli-
cation.
Parameters:
<Format> BMP | PNG | JPG | PDF | SVG
BMP - Windows bitmap
JPG - JPEG bitmap
PNG - portable network graphics format
PDF - portable document format (Adobe
®
Systems)
SVG - scalable vector graphics format, XML-based
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:DEV:LANG BMP
Select Windows bitmap format for printer files.
MMEM:NAME 'C:\Screenshots\PLOT1.BMP'
Define a printer file name and specify an existing directory (with-
out creating the file).
HCOP:DEST 'MMEM'; :HCOP
Select 'Print to file' and create the printer file specified before.
HCOPy:ITEM:ALL
Selects the complete screen contents to be printed, including the logo (HCOPy:ITEM:
LOGO[:STATe]), time (HCOPy:ITEM:TIME[:STATe]), and the marker list (HCOPy:
ITEM:MLISt[:STATe]).
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP
Start printing.
Usage: Event
HCOPy:ITEM:LOGO[:STATe] <Boolean>
Qualifies whether or not the printed output contains the logo. The default R&S logo (file
Logo.gif) is stored in the Resources\Images subdirectory of the VNA program
directory and can be replaced by another logo.
SCPI Command Reference
To Next Page
Loading...
