ROHS ARES-5300 - Boot

- 51 -
BIOS
5.5. Boot
The Boot menu congures how to boot up the system such as the conguration
of boot device priority.
InsydeH20 Setup Utility
Rev. 5.0
Select boot type to Dual type,
Legacy type or UEFI type
Advanced Security Power Boot Exit
Main
Boot Type <Legacy Boot Type>
Quick Boot <Enabled>
Quiet Boot <Enabled>
PXE Boot to LAN <Disabled>
Power Up In Standby Support <Disabled>
Add Boot Options <Auto>
ACPI Selection <ACPI 4.0>
USB Boot <Enabled>
Timeout [0]
Automatic Failover <Enabled>

Legacy
Change ValuesF5/F6
Select

SubMenu
Enter
Select Item
Select Menu
F1
ExitESC
Help Setup DefaultsF9
Save and ExitF10
The featured settings are:
Setting Description
Quick Boot
Allow InsydeH20 to Skip certain tests while booting .
This will descrese the time need to boot the system.
Quiet Boot
Disables or enables booting in text mode.
PXE boot to LAN
Disables or enables PXE boot to LAN.
Power Up In Standby
Support
Disable or enable Power Up In Standby Support.
Add Boot Option
Position in Boot Order for Shell, Network and
Removables.
Options are First, Last, and Auto.
APCI Selection
Select boot to Acpi 3.0/Acpi 1.0B
Options are Acpi 1.0B/Acpi 3.0/Acpi 4.0/Acpi 5.0