12
Base Station Display Functions Introduction
After the base station is connected to the power, the light strip is always on; when the
dust is collected or in mop cleaning state, the light strip shows a gradient marquee light
movement.
Base Station Status Indicator
Dust collection normal indicator
light is always on
Dust full indicator flashes
The connection is normal, the
indicator light is always on
The connection is abnormal,
indicator light flashes
The wastewater tank is not full,
indicator light goes out
The wastewater tank is full, indicator
light is always on
There is water in the clean water
tank, indicator light goes out
The clean water tank empty,
indicator light flashes
Normal battery, the battery
indicator light is off
Low battery, indicator light flashes
The air-drying function works
normally, indicator light is
always on
The air-drying function is not
activated, indicator light is off
Mop cleaning
Recall (robot cleaner)
Start/pause (base station)
Automatic dust collection
Automatic dust collection
Network connection status light
Waste water tank full
Clean water tank empty
Robot cleaner battery status
Smart air-drying
To Next Page
Loading...
