Rola Pick-Up-Rack User Manual

Product Code:
Product Name:
Kit Contents:
59742
Please read all instructions carefully before assembly, installation and/or use of this product.
WARNING: DO NOT exceed 400 Lbs. (182 Kgs)
WARNING: DO NOT exceed vehicle manufacturer’s weight rating.
Pick-Up-Rack™
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
59742N Rev D 4-24-13
Page 1 of 6
Printed in China
• Fully adjustable, fits most pick-up trucks
without integrated bed rail systems
• Stainless Steel hardware
• Light-weight Aluminum extrusion
•Wear-resistant finish
• Aerodynamic design
• Easy-on bar clamps
• No-drill installation
• Double Lock anchor points
KEY FEATURES:

Rola Pick-Up-Rack Specifications

General

Brand	Rola
Model	Pick-Up-Rack
Category	Automobile Accessories
Language	English

Summary

Kit Contents

Key Features

Assembly of Vertical Supports

Step 1: Slide Plastic Cover

Slide plastic cover over vertical support as shown.

Step 2: Assemble Vertical Supports

Slide vertical support and cover into Support Base and secure with hardware.

Vehicle Installation

Step 3: Mount Supports to Bed Rails

Place Vertical Supports onto bed rail, align front to back, and tighten clamps.

Crossbar Installation

Steps 4-6: Prepare and Install Crossbars

Remove end caps, install adapter blocks, place crossbar, mark, and cut under covers.

Step 7: Secure Crossbars

Install crossbars onto Vertical Supports, align, and secure with hardware.

Optional Permanent Mounting

Recommendations and Warnings

Recommendations

Inspect rack often, check connections, use thread locker for frequent removal.

Vehicle Fit Information

Designed for trucks without over-rail liners; avoid integrated systems.

Load Capacity Warnings

Do not exceed 400 lbs. evenly distributed; avoid sharp turns.

Important Load Safety

Secure loads, respect GVW, check connections, use non-stretch tie downs.