Roland A-88 - Placing the A-88 on a Stand; Using Roland KS-12 and KS-18 Z Stands

9
If you want to place the A-88 on a stand, use the Roland KS-12 or KS-18Z.
Place the A-88 on the stand as follows.
Be careful not to pinch your ngers when setting up the stand.
KS-12
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard t into the holes
provided for the rubber
Top view
KS-18Z
Adjust the width of the stand so
that the rubber feet of the A-88
straddle the stand
Align the front of the
A-88 with the front of
the stand
Adjust so that the height
does not exceed 1 meter
(Adjust the stand to a level no
higher than the fourth level
from the bottom)
Top view
Placing the A-88 on a Stand