Roland A-88 - Layering Two Sounds (DUAL); Playing Different Sounds with SPLIT; Changing the Keyboard Split Point

Layering Two Parts
31
Layering Two Sounds (DUAL)
This allows you to use all of the A-88’s keys to simultaneously play the sounds assigned to the
UPPER part and the LOWER part.
Or
Playing Dierent Sounds with the Right and Left
Hands (SPLIT)
Such a division of the keyboard into right- and left-hand sections is called a “Split,” and the key
where the division takes place is called the “Split Point.”
While in Split mode, a sound played in the right side is called an “UPPER part,” and the sound
played in the left side is called a “LOWER part.” The split-point key is included in the LOWER section.
Press either
The following controllers will aect only the part whose indicator is lit (UPPER or LOWER).
• [Pitch Bend/Modulation] lever, [C1] [C2] knobs, [S1] [S2] buttons, D-BEAM controller, Pedals
Changing the Location at Which the Keyboard Is Divided
(Split Point)
Key that you want to
specify as the split point
At the factory settings, the split point is F#3.