Do you have a question about the Roland AX-1 and is the answer not in the manual?
Type | MIDI Keyboard Controller |
---|---|
Velocity Sensitivity | Yes |
Aftertouch | No |
MIDI | Out |
Pitch Bend | Yes |
Modulation | Yes |
Hold Function | Yes |
Power Supply | Batteries |
Connectors | MIDI Out |
Controllers | Pitch Bend, Modulation |
Dimensions | 70 mm |
Number of Keys | 45 keys |
Describes controls on the AX-1 keyboard's neck, including Data Entry, Transposer, and Expression Bar.
Details controls on the AX-1 body for patch selection, data input, and mode settings.
Explains the freedom of movement provided by the shoulder strap.
Highlights the 45-note touch-sensitive keyboard and its MIDI control capabilities.
Describes the dual-section keyboard for split or layer configurations.
Details the placement of modulation, pitch bend, and sustain controls on the neck.
Information on storing and recalling 32 user-defined patches with independent settings.
Details MIDI channel assignments, controller settings, and master controls.
Covers dimensions, weight, power options, and included accessories.
Instructions for using the external AC adaptor, including voltage and socket requirements.
Notes on heat, static electricity, interference, and proper power cycling.
Advice on servicing and seeking qualified personnel for repairs.
Recommendations for optimal placement and cleaning of the instrument.
Guidance on powering on the AX-1 and connecting it to MIDI systems.
How to use the Patch button for mode switching and patch selection.
Guide to assigning controls to the Data Entry potentiometer for parameter control.
How to adjust dynamic response using the Data Entry controller.
Explains how to set transposition and control external MIDI devices.
Procedure for selecting "Variation" sounds using CC buttons.
How to configure MIDI channels and parameters for Upper and Lower sections.
Setting octave shifts and Reverb/Chorus levels for each section.
Procedure to restore the AX-1 to its factory default settings.
How to check battery status and troubleshoot operational failures.
Step-by-step guide for connecting the AX-1 to a Roland Sound Canvas SC-55.
Instructions for connecting the AX-1 with a Roland RA-90 Arranger.
Guide for interfacing the AX-1 with Roland "E" series keyboards.
Setup instructions for connecting the AX-1 to a Rhodes VK-1000.
MIDI configuration details for factory patches 1 through 8.
MIDI configuration details for factory patches 9 through 16.
MIDI configuration details for factory patches 17 through 24.
MIDI configuration details for factory patches 25 through 32.
Chart detailing transmitted and recognized MIDI functions like Note On/Off and Control Change.
Specific data formats for transmitting MIDI messages such as Note Off, Note On, and Control Change.
Compliance statement regarding radio frequency interference for Class B digital devices in the USA.
Statement regarding Class B radio noise emissions compliance in Canada.
Confirmation of compliance with relevant EC directives for electromagnetic compatibility.