Roland D-50 - Page 94

MIDI
step 6 Push the Enter-Key on the transmitter, and the data is transferred,
When the data is correctly transferred, the Diplay responds as shown
below.
@
Handshake
Mode
@
One-way
Mode
[Transmitter] [Transmitter]
bh Dats Transfer * C Bulk fume 7 + Date Transfer * T Bulk Dume.G J
Complete . Complete .
[Receiver] [Receiver]
+ Date Transfer + C Bulk Load J ft Data Transfer * C Bulk Load.d 3
Complete . Complete .
* When the data fails to be transferred correctly, the Display responds
with ;
MIOI Communication Error
Push the Exit Button, then check if the connections are correctly
and securely made,
step 7 To return the Display to the play mode, push the Exit Buttons on
both the receiver and transmitter devices.
step 8 Return the Memory Protect of the receiver to ON.
64