Roland D-50 - Page 95

DATA TRANSFER WITH MEMORY CARD
{6} DATA TRANSFER WITH MEMORY CARD
The entire Palch data wrillcn in the D~50's memory can be saved
on the Memory Card, and the dala on the Memory Card can be
loaded into the D-—50's internal memory.
The data (Reverb Types) on the sound library (ROM Memory Card)
can be copied to the D—50, or from the D-50 to the optional
Memory Card (M~256D).
* Please be sure to use the specified Memory Card, such as the supplied
Memory Card or M—256D.
{Available Reverb Types) A Memory Card can store up to 16 different Reverb Types (17 to
32), as well as 64 Patches. Available Reverb Types differ depending
on which Patch is currently in use, Patch in the internal memory
or on a Memory Card.
Patch in the Internal Memory Patch on a Memory Card
Internal
Reverb
Types
Internal
Reverb
Types
Memory
Card
Reverb
Types
(17~32)
(1~16)
(7~32)
“Patch Trancefer” transfers Reverb Types 17 to 32 at the same
time, and “Reverb Type Copy” can copy a Reverb Type to any of
the 17 to 32 Reverb Types.
1, PATCH TRANSFER
a. Patch Transfer to the Memory Card
All the 64 Patches stored in the D—50’s internal memory can be
saved onto the optional Memory Card (M—256D) at once. At the
same time, 17 to 32 Reverb Types are saved.
Step3
Exit Button
co
Laem atte
Step4
step 1 Connect the Memory Card to the D-—50.
step
2
Set
the
Protect
Swith
on
the
Memory
Card
to
the
OFF
position.
step 3 Push the Data Transfer Button.
* Data Transfer * Select Ture ...
6B. Gump ><¢B. Load (inteCrd (ordeints
65