85
Connecting to Other Devices
You can use a USB MIDI interface cable (sold separately) to
connect the DP-990 to your computer.
If the DP-990 is connected to a computer in which sequencer
software is installed, a song you’ve recorded on the DP-990
can be saved on your computer.
Connection Examples
921
* To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections.
* In order to make connections to your computer, you
must install “MIDI driver” software on your computer.
For details, refer to the owner’s manual for your MIDI
interface.
Use a USB MIDI interface cable to connect the USB
connector of your computer to the MIDI connectors of the
DP-990.
fig.comp.e
Connecting a Computer
USB MIDI Interface
Computer
USB Connector
of your Computer
MIDI Out/In
connectors
DP-990_e.book 85 ページ ２００７年８月２２日 水曜日 午後４時３５分
To Next Page
Loading...
