41
Recording Your Performance
Listening to the recorded performance
fig.Panel
1.
Press the [
] button.
You will return to the beginning of the recorded performance.
2.
Press the [
] button.
The recorded performance will play.
Playback will stop when you press the [ ] button once again.
If you press the [
] button while the metronome is sounding, there will be a two-measure count
(count-in) before playback begins.
The recorded performance will be lost when you turn off the power. If you want to keep your recorded
performance, you must save it to internal memory (p. 43) or to USB memory (p. 63).
You won’t be able to play back another song if there is an unsaved performance. You’ll need to either
delete (p. 42) or save (p. 43) your performance before playing another song.
1
2
If the following indication appears
The confirmation message shown at right will appear if you attempt to select another
song while the previously recorded song has not yet been saved.
Please save your recorded performance to internal memory (p. 43) or USB memory
(p. 63).
• If you decide to erase your recorded performance, press the [ ] button.
• If you don’t want to erase your recorded performance, press the [ ] button.
DP990F_e.book 41 ページ ２０１０年１月１４日 木曜日 午後１１時２９分
To Next Page
Loading...
Need help?
General
