Roland DP-990F - Erasing Your Recorded Performance

42
Recording Your Performance
Here’s how to erase your recorded performance.
fig.Panel
1.
Hold down the [Display] button and press the [
] button.
A confirmation message will appear and the [
] button and [ ] button will blink.
If you decide not to erase the performance, press the [ ] button.
2.
Press the [
] button.
The recorded performance will be erased.
If you hold down the [
] button while pressing a track button, the performance of only that track will
be erased.
A recorded performance will be erased when you turn off the power.
Erasing Your Recorded Performance
1
2
DP990F_e.book 42 ページ ２０１０年１月１４日 木曜日 午後１１時２９分