70
Connecting to Other Devices
Connecting the DP990F to a V-LINK compatible image device allows you to control the images with the DP990F.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
fig.aaa
1. Hold down the [Reverb] button and press the
[Transpose] button.
fig.aaa
When V-LINK is on, the bars at the bottom of the display will
be lit.
You can control images using the twelve keys at the left end
of the keyboard.
fig.aaa
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
To cancel V-LINK, hold down the [Reverb] button and
press the [Transpose] button.
Here’s how to specify the channel on which messages used
to control video will be sent.
1. Enter Function mode, choose “vLn” (p. 52).
2. Use the [-] or [+] button to edit the setting.
Using the V-LINK Function
V-LINK
V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or
more V-LINK compatible devices, you can easily enjoy performing a wide range of visual effects that are linked to the expressive
elements of a music performance.
C1 D1 E1 F1 G1A0
A0 – G#1
B0
Specifying the V-LINK Transmit Channel
Setting
1–16
DP990F_e.book 70 ページ ２０１０年１月１４日 木曜日 午後１１時２９分
To Next Page
Loading...
