44
Recording Your Performance
Selecting the save destination for the song
fig.Panel
1.
Press the [-] or [+] button to select the save destination.
If the dot in the lower right of the display is lit, a song has already been saved in that
number.
Select a number at which no song has been saved.
If you want to erase an unwanted song and replace it with the newly saved song, select
the number of the unwanted song.
2.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and [ ] button will blink.
If you decide not to save the song, press the [ ] button.
3.
Press the [
] button.
The song will be saved.
Never turn off the power while the screen indicates “SAv.”
4.
Press the [Twin Piano] button or the [Key Touch] button.
You will exit Function mode.
* You can’t select another song if the recorded performance has not yet been saved. Either erase your recorded
performance, or save it (p. 41).
4
1
32
Lit if a song
has been saved
DP990F_e.book 44 ページ ２０１０年１月１４日 木曜日 午後１１時２９分
To Next Page
Loading...
Need help?
General
