51
Recording Your Performance
Recording and stopping
fig.Panel
1.
Press the [
] button.
You’ll hear a two-measure count, and then recording will begin.
Alternatively, you can start recording by playing the keyboard instead of pressing the [ ] button. In this
case, there will be no count-in.
When recording begins, the [ ] button and [ ] button will light.
During the count, “-2” then “-1” will be shown as the measure number in the screen.
2.
Press the [
] button.
Recording will stop.
Listening to the recorded performance
fig.Panel
1.
Press the [
] button.
You’ll return to the beginning of the recorded performance.
2.
Press the [
] button.
The recorded performance will play back.
Press the [ ] button once again to stop playback.
Your recorded performance will be lost when you turn off the power. If you don’t want to lose your
recorded performance, you must save it to internal memory (p. 43) or to USB memory (p. 63).
You can’t play back another song if a recorded performance exists. Erase or save your recorded
performance, and then play back the desired song (p. 41).
1
2
DP990F_e.book 51 ページ ２０１０年１月１４日 木曜日 午後１１時２９分
To Next Page
Loading...
Need help?
General
