45
Playing back
After performing the steps described in “Connections before playback” (p. 41) and “Setup before
playback” (p. 43), proceed as follows.
1
Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER]
button. In the Finder screen that appears, use the Cursor
buttons [] [] or the [SCRUB/VALUE] dial to
select a project. For more about the Finder screen, refer to
“Manipulating a project (Finder)” (p. 48).
Alternatively, you can use the [PREV] button or [NEXT]
button on the front panel to select the project you want to
play. The projects are in alphabetical order.
2
Press the [PLAY] button.
The selected project will play.
3
Slowly turn the Monitor level knob to the desired
volume for listening.
* Projects with names beginning with “.” are ignored and are not shown.
* If Japanese (double-byte) characters are used in the project name, it will
not be displayed correctly. We recommend using file names that do not
include Japanese (double-byte) characters so that they are easy to
recognize.
* Projects whose filename extension is not. pjt or. wav will be ignored and will not be shown.
Playing back
Normal playback
1
2
1
R-44_e_new.book 45 ページ ２００８年１月７日 月曜日 午後５時８分
To Next Page
Loading...
