Roland Edirol R-44 - Recording Setup Configuration Details

61
System setup
You can use the same procedure to make the settings listed below. As an example, we will show how to
make Recording Setup settings.
1 Recording Setup
2 Player Setup
3 Speaker
4 Display Setup
5 System Setup
fig.recording-1.eps
1
Press the R-44 [MENU] button.
The System Menu screen is shown on the Display.
fig.recording-2.eps
2
Use the Cursor buttons [ ] [ ] to choose 1 Recording
Setup
, and press the [ENTER] button.
The Recording Setup screen is shown.
3
Use the [SCRUB/VALUE] dial to choose the Input Select
value.
The setting is applied as soon as you select it.
You do not need to press the [ENTER] button.
fig.recording-3.eps
4
Use the Cursor buttons [ ] [ ] to select Rec Freq.
5
Use the [SCRUB/VALUE] dial to select the Rec Freq.
value.
6
In the same way, use the Cursor buttons [ ] [ ] and
the [SCRUB/VALUE] dial to select and set the remaining items.
7
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
8
Press the [EXIT] button again to return to the Main screen.
If you want to make other system settings, use the Cursor buttons [ ] [ ] to select the desired menu
item.
Example operations
Recording Setup
R-44_e_new.book 61 ページ ２００８年１月７日 月曜日 午後５時８分