Roland FC-200 - About Changing the Batteries

33
ABOUT CHANGING THE BATTERIES
When Batteries Need Changing
When the FC-200 is operated only on battery power, the display starts to flash when the batteries
begin to run down. This is a warning that means you need to replace the unit’s six size AA batteries
with fresh ones as soon as possible.
* When the display starts to flash, we recommend setting the Power switch to “ECONOMY” (if
it isn’t already at “ECONOMY”). Of course, you still need to replace the batteries as soon as
possible.
Changing the Batteries
* When changing the batteries, do not mix new batteries with used ones, or mix batteries of
different types.
* Be sure that the positive (“+”) and negative (“-”) ends of the batteries are positioned correctly
when installing new batteries.