Roland FC-200 - Factory Resetting the FC-200 (Initialization); Step-by-Step Initialization Procedure

37
RETURNING SETTINGS TO THEIR FACTORY DEFAULT VALUES (INITIALIZATION)
Initialization lets you return settings that have been edited to the values they had when the FC-200 was shipped from the
factory.
1, 2
32
1. Switch off the power.
2. While keeping Number pedal “10” depressed, switch the power back on.
The indicator for the Control pedal flashes, and [ ] appears on the display.
3. Press the Control pedal.
The indicator for the Control pedal stops flashing and remains continuously lit, the display readout
changes, and initialization begins. When initialization is finished, the FC-200 returns to its normal
state of operation.