30
Chapter 2 Playing Along with Rhythms
Changing a Rhythm’s Tempo
The FP-2 has an optimal tempo for each Rhythm.
You can change the tempo of the selected Rhythm.
Furthermore, you can change the tempo as the Rhythm is being played.
fig.02-08
1.
Press the [Display] button, getting its indicator to light in
orange.
The tempo is displayed.
Pressing the [Display] button alternately displays the tempo, the currently
selected Rhythm number (indicated by an initial “r”), and the currently
selected Song number (indicated by an initial “S”).
2.
Press the [-] or [+] buttons to adjust the tempo.
The tempo can be changed within the range from 20 ~ 250.
When the [Start/Stop] button is pressed, the Rhythm is played at the
selected tempo.
When the tempo is displayed, you can set it to the optimal tempo to appear
in the display, then pressing the [-] and [+] buttons at the same time.
Selecting a Rhythm’s Chord Progression
The FP-2 has an optimal chord progression pattern for each Rhythm.
When playing the Chord Part while performing, the chord progression is
automatic. You can change the chord progression pattern if you want.
fig.02-08
1.
Hold down the [Chord Progression] button and press the [-]
or [+] button to change the chord progression pattern.
The currently selected chord progression pattern number is displayed.
fig.02-11
1
2
If you change the Rhythm
during Session Partner play,
the tempo won’t change. At
such times, you can set it to
the optimal tempo by getting
the tempo to appear in the
display, then pressing the [-]
and [+] buttons at the same
time.
For more information on
chord progression patterns,
refer to the
“Chord Progression Pattern
List” (p. 60).
You can change the root note
of the first chord.
refer to “Setting the Root
Note of the Chord
Progression” (p. 43).
1
Recorded chord progression
patterns are saved to
“ .”
You can select “ ”
patterns by pressing the [-]
button when pattern number
1 is displayed.
FP-2_e.book 30 ページ ２００４年１１月２６日 金曜日 午後４時２５分
To Next Page
Loading...
Need help?
General
