Note : if the switch test has been carried out previously, you may exit pressing MENU
and EXIT at the same time.
2- LED COLOR CHECK
Press the USER PROGRAM 2 button, the display shows:
Action:
If you press the USER PROGRAM 1, all the RED LED buttons will light;
If you press the USER PROGRAM 2, all the GREEN LED buttons will light;
If you press the USER PROGRAM 3, all the BLUE LED buttons will light;
If you press the USER PROGRAM 4, all the two-colour (ORANGE) LED buttons will light;
If you press the USER PROGRAM 4, all the LED buttons will light;
Please refer to the following chart:
LED COLOUR BUTTONS’ NAME
STYLE CONTROL SECTION ¨ (INTRO - NAIN - END / RIT)
MARK & JUMP SECTION ¨ (FROM NO.: 1 BUTTON TO NO.: 4)
(AROUND THE DISPLAY) ¨ (LYRICS & SCORE - EFFECTS - DISK & MIDIA – COVER
- MAKEUP TOOLS - MENU)
TIPE MODE SECTION ¨ (CHORUS - PAN POT)
GREEN NO.: 21
KYB. PART TONE ASSIGN SECTION ¨ (MBS - LW 2 - LW 1 - UP3 - UP2 - UP 1)
BLUE NO.: 2
(AROUND THE DISPLAY) ¨ (MUSIC ASSISTANT)
V- LINK SECTION ¨ (V-LINK)
TWO-COLOUR
ORANGE NO.: 2
STYLE CONTROL SECTION ¨ (START/ SOP)
RECORDER SECTION ¨ (PLAY/ SOP)
RED NO.: 101 REMAINING LEDS
To exit press the EXIT button.
****** LED TEST ******
1. ALL RED LED ON
2. ALL GREEN LED ON
3. ALL BLUE LED ON
4. ALL MULTICOLOR LED ON
5. ALL LED ON
Press EXIT to MENU .
To Next Page
Loading...
