CHECK OF THE SOFTWARE VERSION WITH THE INSTRUMENT SWITCHED ON
With the instrument switched on, check the software version by pressing the switch MENU
and then by selecting on the display, the ambient UTILITY and then INFO. The display will
show the software version and its date.
PROCEDURE TO CHECK THE SOFTWARE VERSION WHEN SWITCHING ON
Switch on the instrument keeping pressed the switch MUSIC ASSISTANCE; after a few
seconds the display will show:
To exit the video press the Exit button: the instrument will show the main video.
TEST MODE
There are two test modes:
A) Switch on the instrument by pressing the switches VARIATION 1, MAIN and
VARIATION 4 in the “STYLE CONTROL” section.
Wait until the display shows the first page of the main menu of the tests.
B) With the instrument on, by proceeding in the following way: Switch on the instrument
and wait until the master video is displayed.
Pressing the switches VARIATION 1, MAIN and VARIATION 4 in the “STYLE CONTROL”
section, the display will show the first page of the main menu of the tests.
Pressing the switch LIST, the display will show the second page of the main menu of the
tests.
FIRST GROUP OF TESTS ( **** TEST MENU ( 1 / 2 ) ****)
**** TEST MENU ( 1 / 2 ) ****
1. SWITCH & LED&NUMERIC PAD
2. LED COLOR CHECK
3. ADC
4. TOUCHSCREEN
5. MASS STORAGE & USB
6. HARMONIZER
7. MIDI
8. PROGRAM & FLASH
Press LIST to scroll menu
**** VERSION ****
Product : G-70
Version: xxx
Date: xx.xx.xx
Time: xx.xx.xx
Build: x.xx
Boot Version: x.xx
Press Exit To Ski
To Next Page
Loading...
