Roland G-70 - Rear Panel Connectivity

G-70
23
Attention:
The tests to follow refer to the software version 1.06.
Before carrying out any updating, please update the G-70 with the
software 1.06 or higher (some parts of the tests might not be correct, as
the differ from version 1.05).
Tools needed:
x Oscilloscope
x Digital multimeter
x Computer
x USB Cable
x n° 2 MIDI cables
x Pen to gauge the touch screen
x PCMCIA Adaptor
x Compact flash
x FC7
x EV5 expression pedal
x Sustain pedal
x Stereo Headphones
UPDATING OF MUSICAL DATA
ATTENTION!!!
The data’s updating entails the loss of personal data contained in the G-70.
There are two modes of updating the Data in the G-70:
Mode 1
: by means of a Card
It is carried out by means of a card of at least 64 Mbytes and of a PCMCIA adaptor for this
card.
Mode 2
: by means of USB connection.
It is carried out by means of a connection USB PC Æ G-70.
MODE 1 – UPDATING MUSICAL DATA BY MEANS OF A CARD:
A. FORMAT A CARD WITH A G-70
x Switch on the instrument.
x Insert a Card in the PCMCIA slot (at least 64Mb).
x Press the switch “DISK & MEDIA” .
x Press the button “Format” on the touch screen.
x Press the button “External Memory on the touch screen.
x Wait for the end of the formatting.