The display shows:
After the display of the message “Power Off and Power On again”, switch off the
instrument.
MODE 2 - UPDATING MUSICAL DATA BY MEANS OF A USB
A. Formatting the G-70’s built-in memory
Switch on the instrument while keeping “CURSOR DOWN”, “EASY SETTING ARR”,
“EASY SETTING PIANO” buttons.
Press the switch “USER PROGRAM 1”.
Wait for the end of the formatting
Switch off the G-70.
B. Copy the musical data into the built-in memory
Connect the G-70 to a PC by means of a USB cable.
Press the switch “MENU”.
Press the button “USB DATA STORAGE” on the touch screen.
Press “INTERNAL MEMORY”: a new G-70 virtual drive will be added on Computer
Resources.
Open the folder previously created in the PC called “G-70” containing the data drawn
CD ROM USB DRIVER.
Copy, selecting and drawing all the files from the PC to the new G-70 virtual drive.
TTENTION!, before withdrawing the USB cable and switching off the instrument,
disconnect the G-70 virtual drive from the PC by means of the appropriate function.
NOT MAKING THE DISCONNECTION MAY CAUSE THE COPY OF THE FILES TO BE
INCOMPLETE.
C. Factory Reset
Switch on the instrument.
Press the switch MENU.
Press the button “UTILITY” on the touch screen.
Press “FACTORY RESET”
Press “EXECUTE” and wait until the operation is completed.
- COPY FROM CARD -
Copy successfull !!.
Factory reset done
Power Off and Power On again
To Next Page
Loading...
