50
Installing & Setting Up the Driver (Windows)
Next, you need to make the driver settings. (p. 57)
If you changed “What action do you want Windows to take?”
If you changed the What action do you want Windows to take? setting, restore the original setting after Windows
restarts.
1. If you are using Windows XP Professional, log on to Windows using the user name of an
administrative account (e.g., Administrator).
2. Click the Windows “start” menu, and from the menu, select “Control Panel”.
3. In “Pick a category”, click “Performance and Maintenance”.
4. In “or pick a Control Panel icon”, click the System icon.
The System Properties dialog box will appear.
* Depending on how your system is set up, the System icon may be displayed directly in the Control Panel (the Classic
display). In this case, double-click the System icon.
5. Click the [Hardware] tab, and then click [Driver Signing]. The Driver Signing Options
dialog box will appear.
6. Return the “What action do you want Windows to take? setting to the original setting
(either “Warn” or “Block”), and click [OK].
7. Click [OK].
The System properties dialog box will close.
To Next Page
