To Next PageTo Next Page
Need help?Do you have a question about the Roland VC-1-SC and is the answer not in the manual?
General| Quantity | 1 |
|---|---|
| Cables included | AC |
| AC adapter included | Yes |
| Video in | SDI, HDMI, VGA |
| Video out | SDI, HDMI |
| Output interface | SDI/HDMI |
| Operating voltage | 9 V |
| Maximum video resolution | 1920 x 1200 pixels |
| Analog signal format system | NTSC, PAL |
| Supported resolutions | 640x480/60/72/75/85Hz, 800x600/56/60/72/75/85Hz, 1024x768/60/70/75/85Hz, 1280x720/60Hz, 1280x768/60/75/85/Hz, 1360x768/60Hz, 1152x864/75Hz, 1400x900/60/75/85Hz, 1280x960/60/85Hz, 1280x1024/60/75/85Hz, 1400x1050/60/75Hz, 1680x1050/60Hz, 1600x1200/60Hz, 1920x1080/60Hz, 1920x1200/60Hz |
| Operating temperature (T-T) | 0 - 40 °C |
| Product color | Black, Grey |
| Converter type | - |
Weight and Dimensions| Depth | 130 mm |
|---|---|
| Width | 150 mm |
| Height | 30 mm |
| Weight | 500 g |
Explains warning symbols and cautionary terms used in the manual.
Covers safe power-off methods and the unit's automatic power-off feature.
Warns against self-disassembly, modification, or repair to prevent damage.
Advises on unsuitable locations and unstable placement to ensure safety.
Instructions for correct adapter/cord use, and preventing cord damage.
Addresses risks from high volume, foreign objects, malfunctions, and impacts.
Covers child supervision, shared outlets, and overseas use precautions.
Guidelines for proper unit ventilation and routing power/signal cables.
Details safe disconnection, cleaning, and storage of the power cord and plug.
Precautions for handling plugs with wet hands, lightning, and keeping items from children.
Covers moving the unit, ground terminal safety, and avoiding burns from heat.
Discusses power supply noise, adapter heat, and placement for interference/condensation.
Details cleaning procedures, prohibited agents, and data backup for repairs.
Includes advice on data loss, connector handling, volume, and unit transport.
Information regarding copyright laws and product usage restrictions.
Description of the main video converter device included in the package.
Description of the user manual provided with the unit.
Description of the power supply accessories included.
Description and installation guidance for the included rubber feet.
Step-by-step instructions for connecting the AC adapter to the unit for power.
Details on connecting the ground terminal for safety and potential hum reduction.
Describes using the integrated cord hook for managing and securing the power cord.
Details using the unit's panel holes to secure the power cord in place.
Step-by-step guide for correctly powering on the unit and connected peripheral equipment.
Step-by-step guide for correctly powering off the unit and connected peripheral equipment.
Explains the automatic power-off feature and its activation conditions.
Instructions on how to disable the AUTO OFF function via mode switch.
Lists supported video resolutions and refresh rates for RGB/YPbPr input connectors.
Lists supported video resolutions and frame rates for SDI input connectors.
Lists supported video resolutions and refresh rates for HDMI/DVI input connectors.
Covers video input standards (NTSC/PAL) and audio input levels/impedance.
Lists supported video resolutions and frame rates for SDI output connectors.
Lists supported video resolutions and frame rates for HDMI output connectors.
Details nominal and maximum output levels and impedance for analog audio outputs.
Instructions for connecting video cameras or devices with SDI output to the unit.
Instructions for connecting devices with HDMI output to the unit.
Instructions for connecting computers or devices with DVI output using a conversion cable.
Instructions for connecting computers or devices with RGB output to the unit.
Instructions for connecting devices with component output to the unit.
Instructions for connecting devices with composite output to the unit's VIDEO INPUT.
Instructions for connecting analog audio output from devices to the unit's AUDIO IN jacks.
Instructions for connecting a clock source to the REF IN connector for synchronization.
Instructions for connecting video decks or monitors to the unit's SDI OUT connector.
Instructions for connecting TV monitors or devices to the unit's HDMI OUT connector.
Instructions for connecting powered speakers or similar devices to the unit's AUDIO OUT jacks.
Instructions for connecting a PC via USB to operate the unit remotely using dedicated software.
How to cycle through and select input connectors using the INPUT SELECT switch.
How to change the screen aspect ratio (scaling) using the SCALING TYPE switch.
Configuration for audio embedding (input) or de-embedding (output).
Configuration for selecting SDI audio groups (1-4) for embedding/de-embedding.
Configuration for selecting specific audio channels (1-8) for embedding/de-embedding.
Configures the output frame rate to 59.94 Hz or 50 Hz.
Configures the output video resolution and progressive/interlaced mode.
Sets the setup level for composite and SD component inputs.
Specifies the mapping structure (Level A or B) for 3G-SDI output.
Sets the control mode and enables/disables the AUTO OFF function.
Details input connector types (SDI, HDMI/DVI, RGB/YPbPr, VIDEO, AUDIO) and their formats.
Details output connector types (SDI, HDMI, AUDIO) and their formats.
Lists other connectors (Reference, USB) and supported signal standards (SDI, Reference).
Details nominal/maximum input levels and impedance for analog audio and reference signals.
Lists power supply, consumption, dimensions, weight, and operation temperature of the unit.
Lists the accessories provided with the unit, such as AC adapter and rubber feet.
Addresses issues with SDI output and HDMI audio, likely due to HDCP or PCM format compatibility.
Solves problems with the AUTO OFF function and unresponsive mode switches on the unit.
Provides solutions for low audio levels, possibly caused by connection cables containing resistors.
