Connecting External Equipment
23
Connecting a clock source
Connect a clock source to the REF IN connector. The VC-1-SC supports the following external
clocks.
• Black burst
• Bi-level/Tri-level synchronization
Never input a signal that includes video. Doing so might cause synchronization to be lost.
Connecting Output Equipment
Connecting SDI equipment
Connect a video deck or other equipment capable of SDI input to the SDI OUT connector.
When the INPUT SELECT switch
(p. 25) is set to Auto, the SDI IN/OUT
connector is locked to operation
as input connector. Use as output
connectors is not possible.
Connecting HDMI equipment
Connect a TV monitor or other equipment capable of HDMI input to the HDMI OUT connector.
To Next Page
Loading...
