Roland VC-1-SH - User Manual

Owner’s Manual
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
* Roland is either registered trademark or trademark of Roland Corporation in
the United States and/or other countries.
* All product names mentioned in this document are trademarks or
registered trademarks of their respective owners.
Before using this unit, carefully read the sections entitled “USING
THE UNIT SAFELY” (p. 3) and “IMPORTANT NOTES” (p. 7). These
sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you
have gained a good grasp of every feature of your new unit, owner’s
manual should be read in its entirety. This manual should be saved
and kept on hand as a convenient reference.
SDI to HDMI

Roland VC-1-SH Specifications

General

Brand	Roland
Model	VC-1-SH
Category	Media Converter
Language	English

Summary

Using the Unit Safely

About WARNING and CAUTION Notices

About the Symbols

Important Notes

About the Power Supply

Provides essential information and precautions regarding the unit's power connection and usage.

Names of Things and What They Do

About Input;Output Formats

Input Formats

Lists the supported video and audio input formats for the SDI and Audio IN connectors.

Output Formats

Details the supported video and audio output formats for the SDI THRU/OUT and HDMI OUT connectors.

Connecting External Equipment

Connecting Source Equipment

Guides on connecting video cameras and audio mixers to the unit's input ports.

Connecting Output Equipment

Instructs on connecting monitors and video decks to the unit's output ports.

Connecting Audio Output Equipment

Setting the Operation Mode

Mode Switch 1: Audio Input;Output Type

Configures the audio input/output type, selecting between Analog and AES3.

Mode Switch 2: Audio Embedding

Determines whether incoming audio signals are embedded into the SDI/HDMI output.

Mode Switches 3;4: Audio Channels for Embedding

Selects the specific audio channels for embedding into the SDI/HDMI output signal.

Mode Switch 5: SDI Audio Groups

Mode Switches 6;7: Audio Output Channels

Mode Switch 8: Audio Embedding Pre;Post

Mode Switch 10: Control Mode and AUTO OFF

Controls the unit's operation mode and enables/disables the AUTO OFF function.