Need help?Do you have a question about the Roland GS-24 and is the answer not in the manual?
Step-by-step guide to inputting and converting text into vector paths for cutting.
Instructions on how to save designs in the EPS format compatible with the vinyl cutter.
Advice on optimizing designs for vinyl cutting, including details, size, and weeding.
Step-by-step guide to inputting and converting text into vector paths for cutting.
Instructions on how to save designs in the EPS format compatible with the vinyl cutter.
Advice on optimizing designs for vinyl cutting, including details, size, and weeding.
General| Blade Force | 30 to 350 gf |
|---|---|
| Mechanical Resolution | 0.0125 mm/step |
| Software Resolution | 0.025 mm/step |
| Repetition Accuracy | ±0.1 mm or less |
| Interface | USB 2.0 |
| Cutting Method | Media-moving method |
| Maximum Cutting Speed | 500 mm/s |
| Cutting Resolution | 0.025 mm/step |
| Cutting Width | 584 mm |
| Cutting Speed | 50 to 500 mm/sec |
| Power Supply | AC 100 to 240 V ±10%, 50/60 Hz |
| Acceptable Material Width | 50 to 700 mm |
| Maximum Cutting Area | 584 mm (22.9 in.) |
| Blade Type | Roland CAMM-1 series blade |
| Operating Temperature | 5 to 40°C (41 to 104°F) |
| Operating Humidity | 35 to 80% RH (no condensation) |
| Media Width | 50 to 700 mm |
| Weight | Approx. 13.5 kg |
To Next Page