Roland VersaSTUDIO GS2-24 - User Manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual com-
pletely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please
inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
FA03761
R2-230120
https://www.rolanddg.com/
Copyright © 2022 - 2023 Roland DG Corporation

Summary

Basic Handling Methods

Basic Information

Provides fundamental details about the cutting machine, including parts, setup, and materials.

Basic Operation

Covers essential operations like power supply, material setup, and output preparation.

Preparations for Cutting Output

Details steps for preparing the machine, blade, and output start location for cutting.

Output Method

Creating Cut Data Using Cut-Studio

Explains how to generate cutting data using CutStudio software, covering cutting and print/cut methods.

Creating Cut Data Using Adobe Illustrator (Windows)

Guides users on creating cutting data with Adobe Illustrator on Windows for the machine.

Creating Cut Data Using Adobe Illustrator (Mac)

Guides users on creating cutting data with Adobe Illustrator on macOS for the machine.

Creating Cut Data Using CorelDRAW

Explains how to create cutting data using CorelDRAW software for the machine.

Procedures after Output

Unloading;Cutting Off Material

Covers the process of removing material from the machine after cutting is complete.

Pausing and Canceling Output

Details how to pause or cancel an ongoing cutting operation to manage the process.

Other Cutting

Print & Cut in Tool Mode

Describes the Print & Cut process using Tool Mode for manual alignment.

Print & Cut in Manual Mode

Explains the Print & Cut process using manual alignment methods and tool marks.

Optimizing Quality and Efficiency

Optimizing Cutting Quality

Provides methods and settings to improve the quality of cutting results.

Optimizing Work Efficiency

Offers techniques to enhance the efficiency of cutting workflows and data management.

Optimizing Operation Management

Managing the Basic Settings of the Machine

Covers how to manage fundamental machine settings like language, units, and display brightness.

Maintenance

Cleaning and Consumable Parts

Details procedures for cleaning the machine and information on consumable parts like blades.

Troubleshooting Methods

Cutting Problems

Addresses common issues encountered during the cutting process and their solutions.

Machine Problems

Lists and explains problems related to the machine's operation and connectivity.

Software Problems

Covers issues related to driver installation, uninstallation, and software compatibility.

Data Troubles

Discusses problems encountered when importing or using data files like Illustrator or sample data.

Messages on the Operation Panel

Explains various error messages displayed on the machine's panel and how to resolve them.

Main Specifications

Cutting area

Specifies the dimensions and limitations of the machine's cutting area.

Margins and the Distance between Crop Marks

Details the margins and distances required for accurate crop mark placement for print & cut.

Specifications

Provides a comprehensive list of the machine's technical specifications and environmental requirements.

Roland VersaSTUDIO GS2-24 Specifications

General

Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Acoustic Noise Level During Operation	Less than 60 dB
Operating Humidity	35 to 80% RH (no condensation)
Included Items	Blade, blade holder, power cord, USB cable
Cutting Width	24 inches (610 mm)
Maximum Cutting Speed	800 mm/s
Blade Types	CAMM-1 series blades
Connectivity	USB
Software Compatibility	Roland DG software
Power Requirements	AC 100 to 240 V ±10% 50/60 Hz