Roland GS2-24 - User Manual

機体の設置とソフトウェアのインストール
機体を設置して、ソフトウェアをインストールします。下記の URL または QR コードからマニュアルを参照してください。
Step 1 : 機体の設置 Step 2: インストールと初期設定
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS-H_JP/index.
html
For Windows:
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS2-H_WIN_JP/
index.html
For Macintosh:
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS2-H_MAC_JP/
index.html
これで機体を使用するための準備は完了です。
クイックアクセスガイド
R1-220222TW
記載されている会社名、製品名は、各社の商標および登録商標です。
https://www.rolanddg.co.jp/
Copyright © 2022 Roland DG Corporation
Installing the Machine and the Software
Install the machine, and then install the software. For more information, see the manuals by using the following URLs or QR codes.
Step 1 : Machine installation
Step 2 : Installation and initial settings
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS-H_EN/index.
html
For Windows:
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS2-H_WIN_EN/
index.html
For Macintosh:
https://downloadcenter.rolanddg.com/
contents/manuals/GS2-24_INS2-H_MAC_EN/
index.html
This completes the preparation necessary to use the machine.
Quick Access Guide
R1-220222TW
Company names and product names are trademarks or registered trademarks of their respective holders.
http://www.rolanddg.com/
Copyright © 2022 Roland DG Corporation

Summary

Installing the Machine and Software

Machine Installation

Step-by-step guide for the physical installation of the machine.

Software Installation and Initial Settings

Instructions for installing the software and configuring initial settings.

Machine Usage and Operation

Basic Information

Overview of machine parts, functions, and fundamental details.

Operating the Machine

Guidance on machine operation, settings, and adjustments.

Machine Maintenance and Troubleshooting

Maintenance Procedures

Information for maintaining the machine to ensure good cut quality.

Troubleshooting Common Issues

Guidance on how to identify and resolve machine problems effectively.

Roland GS2-24 Specifications

General

Software Resolution	0.025 mm
Repeatability	±0.1 mm
Connectivity	USB
Software Compatibility	Roland CutStudio
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5°C to 40°C
Operating Humidity	35% to 80% (non-condensing)
Weight	10 kg