Need help?Do you have a question about the Roland Sign Maker CAMM-1 PNC-1050 and is the answer not in the manual?
General| Maximum Cutting Speed | 500 mm/s |
|---|---|
| Cutting Force | 20 to 300 gf |
| Interface | RS-232C |
| Maximum Media Width | 1050 mm |
| Power Supply | AC 100V-240V, 50/60Hz |
| Mechanical Resolution | 0.025 mm |
| Software Resolution | 0.025 mm/step |
| Operating Temperature | 5 to 40°C |
| Operating Humidity | 35 to 80% RH (no condensation) |
| Blade Type | Roland CAMM-1 series blade |
To Next Page