Need help?Do you have a question about the Roland GX-24 and is the answer not in the manual?
General| Cutting Speed | Up to 20 inches/sec (500 mm/sec) |
|---|---|
| Distance Accuracy | ±0.004 inches (±0.1 mm) or less |
| Repeatability | ±0.1 mm (0.0004 in.) or less |
| Interface | USB |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 5 to 40°C (41 to 104°F) |
| Operating Humidity | 35 to 80% RH (non-condensing) |
| Software Resolution | 0.025 mm/step (0.001 in./step) |
To Next Page
