Roland GX-24 - User Manual

USER'S MANUAL
Thank you very much for purchasing this product.
➢ To ensure correct and safe usage with a full understanding of this product's performance, please be
sure to read through this manual completely and store it in a safe location.
➢ Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
➢ The contents of this operation manual and the specifications of this product are subject to change
without notice.
➢ The operation manual and the product have been prepared and tested as much as possible. If you
find any misprint or error, please inform us.
➢ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur through use of this product, regardless of any failure to perform on the part of this product.
➢ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur with respect to any article made using this product.

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)

Summary

To Ensure Safe Use

Warning and Caution Notices

Explains the meaning of WARNING and CAUTION notices used in the manual.

Safety Symbols and Labels

Defines safety symbols and details warning labels affixed to the machine and their meanings.

Important Notes on Handling and Use

Main Unit Handling

Covers handling precautions for the main unit, emphasizing carefulness and avoiding impact.

Installation Location Guidelines

Specifies requirements for installing the machine in a suitable environment.

Cable Connection Notes

Provides crucial instructions for securely connecting power and computer cables.

Machine Moving Precautions

Details how to safely move the machine, emphasizing proper support.

About the Documentation

Included Documentation List

Lists the printed and online documentation provided with the machine.

Viewing Electronic Manuals

Instructions on how to access and view the electronic-format manuals for Windows and Macintosh.

Chapter 1: Getting Started

Machine Features and Included Items

Highlights machine features and lists all included items.

Main Unit Part Names and Functions

Identifies and describes the parts of the main unit, including the operation panel.

Chapter 2: Preparing the GX

Machine Installation

Guides on selecting an installation site, space, and removing packing materials.

Cable Connection and Display Settings

Details connecting cables and changing the display language for machine setup.

Chapter 3: Software Installation and Uninstallation

Included Software Overview

Lists the software included on the CD-ROM for Windows and Macintosh.

Windows Software Installation and Uninstallation

Covers system requirements, installation, and uninstallation procedures for Windows.

Macintosh Software Installation

Details the process for installing software and operation manuals on a Macintosh.

Chapter 4: Performing Cutting Operations

Performing Test Cuts

Guides through loading material, installing blade, and optimizing quality via test cuts.

Creating and Performing Cuts

Covers creating cutting data, setting origin, performing cuts, and applying material.

Using Different Materials

Instructions for using roll material, fine-tuning blade force, and adjusting cutting amount.

Chapter 5: Machine Maintenance

Cleaning Procedures

Instructions for cleaning the machine's components like pinch rollers and display.

Replacing the Cutting Blade

Step-by-step guide on how to safely replace a dull cutting blade.

Chapter 6: Troubleshooting Guide

Problem Resolution

Addresses common issues like machine not running, material coming loose, or cutting quality problems.

Chapter 7: Appendix

Usable Materials Specifications

Defines the conditions for loadable material width, length, and thickness.

Label Locations

Identifies the locations of power rating and serial number labels on the machine and adapter.

Machine Specifications

Provides detailed technical specifications for the cutting machine.