Roland GX-24 User Manual

12
About the Documentation
Viewing the Manuals in Electronic Format
If you encounter a problem, then along with this document, also take a look at the manuals in electronic format. Read
on to learn how to view the electronic-format manuals.
Windows
➢Roland CutStudio Online Help (Windows)
After you start CutStudio, go to the menu bar and click [Help], then [Contents].
Alternatively, click [Start], point to [Programs] (or [All Programs]), then point to [Roland CutStudio].
Click [CutStudio Help].
➢CAMM-1 Driver Online Help (Windows)
Go to the driver's window and click the [Help] button.
➢CutStudio Plug-in for Adobe Illustrator Online Help
At the [Roland CutStudio] palette, click the button, then click [Help].
For more information, refer to the "CutStudio Plug-in for Adobe Illustrator/CorelDRAW Setup Guide."
➢Operation Manuals
Click [Start], point to [Programs] (or [All Programs]), then point to [Roland GX-24 Operation Manuals].
Click the electronic-format manual you want to view.
Macintosh
➢CutStudio Plug-in for Adobe Illustrator Online Help
At the [Roland CutStudio] palette, click the button, then click [Help].
For more information, refer to the "Macintosh Cutting Guide."
➢Operation Manuals
On the desktop, double-click the icon for the manual.

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)