Roland GX-24 User Manual

Chapter 1: Getting Started
14
1-1 Machine Features
This is a USB/Serial compatible high-performance cutting machine that offers features like those described below.
Quiet
➢Quiet cutting achieved through use of servo motors
Easier to Use
➢Two-line backlit display for clear visibility even in dark locations
➢Operation panel and menus organized with a simple, easy-to-understand layout
➢Comes with Roland CutStudio which is a Windows-based cutting program enabling high-quality cutting with
easy operation
Versatile Range of Practical Applications
➢Included software plug-ins that enable CutStudio to cut data created using commercially available programs
➢Crop-mark feature that can align an image and contour lines when printing an image on a printer and cutting
the contours on this machine

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)