Roland GX-24 User Manual

Chapter 5: Maintenance
58
5-1 Cleaning
Before attempting cleaning, lower the loading lever and remove the material.
Clean by wiping with a cloth moistened by water then wrung dry.
Notes
➢Never use a solvent such as thinner or benzine.
➢Never attempt to oil or lubricate the machine.
CAUTION
Before attempting cleaning, switch off the power.
Sudden movement of the machine may cause injury.
Pinch rollers
Periodically wipe away any grime.
Lower the loading lever.
Grit rollers
Use a brush to remove any buildup
of material scraps and the like.
Never use a metal brush.
Display
Wipe gently with a clean, soft cloth.

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)