Roland GX-24 User Manual

Chapter 3: Installing/Uninstalling Software
33
3-3 If You're Using a Macintosh
The included CD-ROM contains the "Mac OS Installation and Setup Guide," which explains how to install and set up
the software and operation manuals for the Macintosh. If you're using a Macintosh, follow the steps below to display
the file, then follow the explanation to perform installation and setup.
Procedure
➊
Insert the included CD-ROM into the CD-ROM drive.
➋
Double-click the [Roland GX-24] icon that appears on the desktop.
➌
Double-click the "Install_e.html" icon.
The [Mac OS Installation and Setup Guide] appears.
➍
Thereafter, follow the instructions in the [Mac OS Installation and Setup Guide] to install and set up
the software and operation manuals.

Roland GX-24 Specifications

General

Cutting Speed	Up to 20 inches/sec (500 mm/sec)
Distance Accuracy	±0.004 inches (±0.1 mm) or less
Repeatability	±0.1 mm (0.0004 in.) or less
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 to 40°C (41 to 104°F)
Operating Humidity	35 to 80% RH (non-condensing)
Software Resolution	0.025 mm/step (0.001 in./step)